Aerocity Power Supply Replacement Suggestions

[arcadeaction]

An original Aerocity has a bad power supply. The intention is to run JAMMA games but also a Naomi with Capcom I/O.

Would the following power supply with adapter cable be deemed sufficient enough to support running the Naomi hardware? Just confirming before going that route.

16Amp Power Supply:
https://www.amazon.com/Marwey-Switc...a66e73330ad63cdf95f31b982b79c63a&gad_source=1

Adapter Cable to use with cabinet:
https://www.ebay.com/itm/174516239184

Thanks for the suggestions.

 

[twon]

The power supply should work with the cable you have listed. The only thing you might want to consider is if you plan on running a cf/net dimm setup with the Naomi, the capcom I/o will not provide enough power to run this setup. You’ll need to purchase an additional psu like a Sun or an atx with a custom cable. Good luck