Are MS2933 and Wei-ya tri-sync 29's yoke-compatible?

[rewrite]

Just that. Have a spare Wei-ya out of an AWSD and wondering if it's yoke-compatible with an MS2933.

 

[dewmansnk]

The Wei-Ya were usually good about putting the specs on the label on the heat sink but from memory, the 3129D is expecting around ~ 0.315 mH on the horizontal and around 7-8mH on the vertical. Not sure exactly on the MS2933 - but I think the bigger compatibility hurdle is the focus. Dual focus on the 3129D and I believe only single focus on the MS2933.

 

[rewrite]

The Wei-Ya were usually good about putting the specs on the label on the heat sink but from memory, the 3129D is expecting around ~ 0.315 mH on the horizontal and around 7-8mH on the vertical. Not sure exactly on the MS2933 - but I think the bigger compatibility hurdle is the focus. Dual focus on the 3129D and I believe only single focus on the MS2933.

Thanks! Will probably end up in the "going out the door" pile in that case.