What's new
By:

FS Area 51: Site 4 PCB, and more

For Sale
opt2not

opt2not

Multi Boyz Pixeler
Legendary
Multi Boyz
Joined
Nov 10, 2015
Messages
3,083
Reaction score
6,309
Location
California
Looking to offload some stuff I'm not using. Prices are shipped in the CONUS. International pays for actual shipping. If you don't like my prices, MMAO and let's negotiate.

Taito FastIO w/ G-Harness + Taito Vewlix Control Panel harnesses for a P1\P2 - fully working
$210 shipped — SOLD


Atari Area 51 Site 4 PCB - Not working - $175 $150 $125 shipped - SOLD


GameBox Dos Aldine 2012 (450 in 1) - Not working - MMAO
I believe the HDD has failed. There has been great efforts to resurrect these in this thread, I just don't have anything that reads/writes IDE drives. Could be an easy fix for someone. I know next to nothing about these little mame boxes, but I read that they are decent plug-n-play devices.

Comes with original box, instructions, and instruction strips.

IMG_8178.jpg


IMG_8177.jpg


IMG_8176.jpg
 

Attachments

  • 1737592545870.png
    1737592545870.png
    747.4 KB · Views: 308
  • 1737592562651.png
    1737592562651.png
    596.7 KB · Views: 285
  • IMG_8146.jpg
    IMG_8146.jpg
    452.5 KB · Views: 137
  • site4_IMG_8250.jpg
    site4_IMG_8250.jpg
    210 KB · Views: 162
  • site4_image.jpg
    site4_image.jpg
    225.1 KB · Views: 168
Last edited:
Forgot to say this is a MMAO situation too. Always down to negotiate price.
 
Still available. Use this with your Taito Type X's!

MMAO if you don't like my price.
 
Bump!

I combined the FastIO set with the Vewlix CP harnesses to help move it. Same price, just includes the CP harnesses for free now.

Also added a non-working GameBox Dos Aldine 2012 (450 in 1). I believe the HDD has failed. It boots and goes passed boot post, but doesn't load the HDD. I don't have a replacement or a way of reading or writing IDE (nor do i care to put that much effort into this). Could be a cheap little jamma mame box for someone to get up and running. MMAO on that one.
 
Bump.
Area 51: Site 4 PCB is back up for sale.
I tried a few things to see if I can get it working, but wasn't able to.

Board fails to boot: Boots up to black screen. PWR LED is lit, but the HDD read/activity LEDs do not light up. I figured it was a bad HDD, but i swapped it with a DOM (disc on module) and still wasn't able to boot. I've made sure I had 5v solid, as well as -5v present, and also replaced the two 1000uf caps near the CPU with new Nichicon caps, to no avail.
I don't have the time to fully dive-in and troubleshoot this, and I'm not super familiar with this hardware. My loss is your gain.
 
Last edited:
Taito Fast IO bundle has been sold.

Bump for the rest.
 
Reduced the price of the Area 51 Site 4 PCB. Now $150 shipped
 
Area 51 is now sold. Thank you all for the interest.

Bump for the Gamebox. This is a MMAO item that I just want to get rid of.
I don't really want to dig into fixing it as I got enough dang projects for this hobby as is.
 
You must log in or register to reply here.
Back
Top