ATX PSU Question Naomi 2

[swisstoni]

Ive just purchased an ATX adapter for my Naomi 2 board is it possible to use a smaller Pico PSU rather than a large PC power supply if so can anyone recommend one (im in the UK and will be using the Naomi 2 in a Sega Astro City with a Capcom IO also I will be netbooting using a raspberry pi)

 

[samplehunters]

Not sure about the Naomi 2 but I've used a PicoPSU 80W (with a 65W adapter) on a Naomi 1 with a Netdimm module without any issues.

Apparently the Naomi hardware is very similar to the Dreamcast, which only consumes around 22W according to the internet.

 

[swisstoni]

Thanks for the reply please could you post a link to where you bought them from if possible.

 

[samplehunters]

Bought it years ago from an online retailer that no longer carries it but they're available on eBay.