What's new
For Sale

sheep_nova

Grand Master
Joined
Dec 9, 2018
Messages
439
Reaction score
671
Location
China
SF2 USD140.00(picture 7976-7980)
Gunbird 2 US200.00(if u can also take the other game),we'll give u some more discount^+^.
 

Attachments

  • IMG_7977.JPG
    IMG_7977.JPG
    248.2 KB · Views: 219
  • IMG_8031.JPG
    IMG_8031.JPG
    251.2 KB · Views: 198
  • IMG_8030.JPG
    IMG_8030.JPG
    237.5 KB · Views: 219
  • IMG_8029.JPG
    IMG_8029.JPG
    244.6 KB · Views: 150
  • IMG_8027.JPG
    IMG_8027.JPG
    247.4 KB · Views: 185
  • IMG_8026.JPG
    IMG_8026.JPG
    281.2 KB · Views: 163
  • IMG_7980.JPG
    IMG_7980.JPG
    234 KB · Views: 210
  • IMG_7979.JPG
    IMG_7979.JPG
    233.7 KB · Views: 149
  • IMG_7978.JPG
    IMG_7978.JPG
    236 KB · Views: 129
  • IMG_7976.JPG
    IMG_7976.JPG
    264.5 KB · Views: 173
Last edited:
That's a PS3-V1 pcb (weird, as Gunbird 2 used to be in PS5 pcb)

Is PS3-V1 board also elegible for Multi?
"PS5 has a different memory map than PS3-V1. Otherwise identical." According to mamedev. So its a conversion...and in poor condition.
 
"PS5 has a different memory map than PS3-V1. Otherwise identical." According to mamedev. So its a conversion...and in poor condition.

Maybe they are identical in terms of game capabilities, but they are physically different.

  • PS3-V1 (from Strikers 1945 II):
s1945II.jpg


  • PS5 (from Strikers 1999):
s1999.jpg



Also, PS5 variant has an enhanced audio circuit. It's able to use YAC513 or YAC516 (more complex) DACs



And sorry to the OP, for hijacking the thread :S
 
Gunbird 2 pcb looks legit to me, dont think its a convertion.
 
  • Like
Reactions: nem
Gunbird 2 pcb looks legit to me, dont think its a convertion.
Seconded. Not the first time I have seen Gunbird 2 on this PCB type. My guess is that Psikyo used whatever PCB stock they had available.

Program ROMs on this one will match the PS5 version. The different memory map is handled elsewhere on the PCB.
 
Whoever buys that GunBird Please dump the ROMs. Those look like original Psikyo ROMs which means that the memory map refactoring may be in Code as opposed to PCB logic.

it's also possible that the epoxy bubbles on the top and bottom of the PCB are where the logic was remapped (these are the exact areas you need to modify to perform a remap), and if that's the case then the multi may not work on this board as it will undoubtedly need to tap into the pads in the memory map areas in order to switch between PS3 and PS5 memory maps.
 
Whoever buys that GunBird Please dump the ROMs. Those look like original Psikyo ROMs which means that the memory map refactoring may be in Code as opposed to PCB logic.

it's also possible that the epoxy bubbles on the top and bottom of the PCB are where the logic was remapped (these are the exact areas you need to modify to perform a remap), and if that's the case then the multi may not work on this board as it will undoubtedly need to tap into the pads in the memory map areas in order to switch between PS3 and PS5 memory maps.
I've checked the EPROMs on a Gunbird 2 running on PS3-v1 and they matched MAME.

You might be right about those epoxy bubbles.
 
Yeah I've seen Gunbird 2 running on PS3-V1 as well (I actually own one), but never with original Psikyo Mask ROMs and original Program ROM stickers.

It stands to reason if it was a genuine Psikyo conversion they'd have the source code to recompile with the alternative map.
 
Yeah I've seen Gunbird 2 running on PS3-V1 as well (I actually own one), but never with original Psikyo Mask ROMs and original Program ROM stickers.

It stands to reason if it was a genuine Psikyo conversion they'd have the source code to recompile with the alternative map.
On the other hand it's hard to imagine a bootlegger using genuine EPROMs and such a clean memory map fix.

Hard to know for sure, but signs point to legit.
 
Whoever buys that GunBird Please dump the ROMs. Those look like original Psikyo ROMs which means that the memory map refactoring may be in Code as opposed to PCB logic.

it's also possible that the epoxy bubbles on the top and bottom of the PCB are where the logic was remapped (these are the exact areas you need to modify to perform a remap), and if that's the case then the multi may not work on this board as it will undoubtedly need to tap into the pads in the memory map areas in order to switch between PS3 and PS5 memory maps.
I sent a PM on Gunbird 2 even before seeing this.

I want to play this game. Not confident in my ability to dump the ROMs, but would GLADLY send it to someone who can (and I have a buddy locally who may well be able to help as well.)
 
Guardians, USD145.00
Strikers 1945 I USD130.00

If u can take the 2 pcs game at the same time,we'll give u some more discount.

Thx
 

Attachments

  • IMG_9724.JPG
    IMG_9724.JPG
    221.8 KB · Views: 96
  • IMG_9727.JPG
    IMG_9727.JPG
    164.7 KB · Views: 103
  • IMG_9969.JPG
    IMG_9969.JPG
    242.8 KB · Views: 105
  • IMG_9970.JPG
    IMG_9970.JPG
    214 KB · Views: 104
  • IMG_9971.JPG
    IMG_9971.JPG
    138.4 KB · Views: 90
Back
Top