Capcom I/O mod for Atomiswave SD wiring.

[danzk]

Wanted to share a simple mod I did to my Capcom I/O board to get 6 buttons without needing a kick harness and rewiring my cabinet.
The Atomiswave SD has buttons 1 to 5 on the Jamma edge and button 6 on a separate connector.
I soldered wires for buttons 4 & 5 from the JAMMA edge to the 34pin connector.
Then I connected the two wires from the "C3" connector for the 6th buttom.

Jamma	34 pin Connector
c	21
d	23
25	19
26	17

 

[bagheera369]

man...I'm glad it worked for you.....but I just dont get that...cps2 kick harness is 15$? not worth having to break out the 30ga at that point, to mod an IO.