FS CAVE Kit/box protector Interest Check

[fuzzbuddy]

I've had a couple of people message me about these recently. Curious if anyone else is still after some of these in today's market:

I'd have to make 200 (min). They'd be quite thick 0.7-0.8mm thick PET (much stronger than the alternatives which are no longer for sale either).

I imagine not many people are after these anymore.

 

[djsheep]

Mine are plastic’d up. But if not, id be all over this. They look much nicer on the shelf that way.

 

[EvilMike]

Can post a pic with a pcb in it?

 

[fuzzbuddy]

Can post a pic with a pcb in it?

These are for the kit boxes. Like this:

Note: The Ichimura one at the bottom still has the protective film on it - that's what those wrinkles are.

 

[plasticfactory]

I'd be in for 5, maybe 10. Still a long road ahead for 200 pieces

 

[FrancoB]

These are for the kit boxes. Like this:

You really should hide the crayons from the little ones bud, look what they've done to your boxes!

 

[EvilMike]

Ohhhhhhh

 

[fuzzbuddy]

Ohhhhhhh

What you probably want is @plasticfactory's amazing enclosure:

Thread 'CV1000 Enclosure'

Apr 22, 2025

I finally got around to working on more projects this year and wrapped this guy up today.

The enclosure was designed to have a floating "frame" to which the board mounts. I used silicone spacers to keep metal hardware off the PCB, and to absorb impact in the event of bumps or drops. Probably a negligible improvement to protection, but I wanted to get a little more creative with this one given the value of Cave PCBs.

I aim to do a few "special" versions (EG, blue/orange for the Donpachi series, pink/purple/emerald for Mushi, etc.). I also plan to make a base for the original Cave boxes...

• plasticfactory
• Replies: 14
• Forum: Project Showcase

• 
• 

 

[SnakeGrunger]

I would declare interest in 6, I can edit my post in a little bit once I get home, but that would be my baseline I'm 95% sure.