nekojeeta
Student
I have an MK30 ADCAP from Jansen with a DB9 connection for a kick harness. I was hoping to buy some pre-made CPS1/2 kick harnesses, but it looks like they are sparse so I've decided to make my own. I found the CPS2 to female DB9 wiring guide, but I can't find a CPS1 to female DB9 wiring guide. Anyone have this handy?
Here is the CPS2 to female DB9 guide:
http://www.jamma-nation-x.com/jammax/multikickharness.html
The CPS1 connector is an H JST connector and has wires from 1-10 (the slots for wires 6 and 10 do not have wires on the harness I purchased from mike's arcade). Thanks!
Here is the CPS2 to female DB9 guide:
http://www.jamma-nation-x.com/jammax/multikickharness.html
The CPS1 connector is an H JST connector and has wires from 1-10 (the slots for wires 6 and 10 do not have wires on the harness I purchased from mike's arcade). Thanks!