Does anyone repro locking mechs for a Neo25 or know where I can buy some NOS, or even used?

[HornheaDD]

I have a Neo25 that I bought ages ago and it didn't come with the locking mechanism that is under the CP. It looks like the locks were drilled out (there are only two holes for the locks left) and the whole piece in there is missing.

I honestly don't even know what the thing looks like to search for it. Only recently has it been that some friends have come by to start playing regularly and sometimes when two players are playing the CP will open when games are getting intense. I need to stop that.

 

[nem]

I wouldn't even call it a mechanism. It's just a long S-shaped piece that goes inside an U-shaped piece when the lock is turned. Both sides have them.



I think this is something that could be 3D printed.

Do you have the U-shaped pieces on your CP?

 

[HornheaDD]

Ah I see. I do have the bracket that is attached to the CP itself, and the U shaped pieces are there.

So I just need some tabs that connect directly to the locks.

 

[HornheaDD]

Huh. Turns out I actually do have those S pieces! Isn't that serendipitous. They were in the bottom of the coin box, I guess I must've forgotten. Now I just need to get some tubular locks, and just have to figure out what size they need to be. If that is your cab @nem are you able to tell what length those locks are?

 

[nem]

Excellent!



I measured 17.50mm with a caliper. It doesn't have to be super exact, because the depth of the U-pieces can be adjusted.