WTB Egret 29 Parts (many needed)

[trashedcabs]

I have a gutted Egret 29 that was sitting in a field planned for a restoration likely next year after my current one is finished. Finding ANY of these will significantly reduce the amount of work I need to do remaking or repairing the parts I have now.

In order of importance:

• Entire wiring harness including control panel harnesses
• Entire control panel housing assembly (I don't need the control panel itself, I need the actual plastic shell and steel housing with all latches etc)
• Test/service panel
• Top and bottom bottom bezel plastic (the plastic pieces the glass sits on)
• "Egret 29" illumination panel
• Rear power input/switch assembly
• Coin mech assembly (bracket etc)
• Monitor chassis shelf/bracket

Please DM me if you have any of these in ANY condition. Thanks!

 

[trashedcabs]

Bump. I know it's unlikely but plz help

 

[twistedsymphony]

I don't have any of those parts as spares but I'll keep an eye out.

 

[imbord3rlin3]

lemony can make u the harnesses

 

[twistedsymphony]

lemony can make u the harnesses

I'm sure he can make a replacement, but not the original modular one, some of the connectors are unobtainable.

 

[trashedcabs]

All of the connectors are still manufactured except for the exact 56 pin connector. I actually just spent like $400 in wire and connectors and will be making my own harness--will update the post.

 

[Lemony Vengeance]

Excuse me, I can.

I have made several.

And yes I can find connectors.

 

[Mrhide]

Test/service panel

Unlikely knowing what you so but if you’re stuck, you can always print my bad one

 

[twistedsymphony]

I stand corrected!

 

[Hikaru]

I have a gutted Egret 29 that was sitting in a field planned for a restoration likely next year after my current one is finished. Finding ANY of these will significantly reduce the amount of work I need to do remaking or repairing the parts I have now.

In order of importance:

• Entire wiring harness including control panel harnesses
• Entire control panel housing assembly (I don't need the control panel itself, I need the actual plastic shell and steel housing with all latches etc)
• Test/service panel
• Top and bottom bottom bezel plastic (the plastic pieces the glass sits on)
• "Egret 29" illumination panel
• Rear power input/switch assembly
• Coin mech assembly (bracket etc)
• Monitor chassis shelf/bracket

Please DM me if you have any of these in ANY condition. Thanks!

Do you have a picture of the cab?

 

[trashedcabs]

Do you have a picture of the cab?

I have a thread with the two cabinets I am restoring. The cabinet missing many parts is here: https://www.arcade-projects.com/threads/another-00s-mame-victim-egret-29-restore.33949/#post-464938