fox_tango
Student
Hi All!
I'm troubleshooting the license card readers on one of my F-zero AX cabs. There are no obvious signs of damage like a blown cap, damaged trace, or obviously burned up component. The card reader functions are all working except the actual read/write to the magentic card. It can load a card, dispense a card from the holder, moves it in and out, actuate the front lid, etc). When executing the read/write test in the game test menu, the card just passes back and forth over the read/write head several times before timing out, after which the card is ejected.
Fortunately, I have two other good card readers to swap parts with to isolate the problem. Unfortunately, it's narrowed down to the PCB.
Given that there are no obvious signs of a problem, I need to start poking around on the PCB but was HOPING that there was a schematic out there to help guide my prodding. This board is surprisingly complex (much more so than the typical 80's arcade game board) and I don't think there is much chance of me figuring it out, but I wanted to give it a try anyway.
Anybody have any info on these things?
...and while we're at it, I am looking for the metal housing that holds the card reader on top of the coin tower (just in case anyone sees this and has one available for sale).
Thanks all!
I'm troubleshooting the license card readers on one of my F-zero AX cabs. There are no obvious signs of damage like a blown cap, damaged trace, or obviously burned up component. The card reader functions are all working except the actual read/write to the magentic card. It can load a card, dispense a card from the holder, moves it in and out, actuate the front lid, etc). When executing the read/write test in the game test menu, the card just passes back and forth over the read/write head several times before timing out, after which the card is ejected.
Fortunately, I have two other good card readers to swap parts with to isolate the problem. Unfortunately, it's narrowed down to the PCB.
Given that there are no obvious signs of a problem, I need to start poking around on the PCB but was HOPING that there was a schematic out there to help guide my prodding. This board is surprisingly complex (much more so than the typical 80's arcade game board) and I don't think there is much chance of me figuring it out, but I wanted to give it a try anyway.
Anybody have any info on these things?
...and while we're at it, I am looking for the metal housing that holds the card reader on top of the coin tower (just in case anyone sees this and has one available for sale).
Thanks all!