What's new
By:

WTB Fast I/O DMAC input board for Taito Type X2

Want To Buy
PascalP

PascalP

Legendary
Joined
Jan 17, 2016
Messages
5,634
Reaction score
3,770
Location
The Netherlands
Looking for some stuff:

- Taito Fast I/O DMAC input board for TTX2
- Nesica RFID card reader (found)
- Sega to Taito adapter board for I/O wiring

If anyone has something, or can find some on YAJ for me, that would be awesome :thumbsup:

Fast I/O DMAC input board for Taito Type X2 (2nd card from the left);

SAK7skQ.jpg


DWw8WJA.jpg
 
Last edited:
this should be the correct items;

Conversion PCB for Sega to Taito harness:
ZubwcFi.jpg



DMAC I/O card (2nd from the left):
SAK7skQ.jpg



cardreader;

Edit
fUnUiq5.jpg
 
@ThisGuy thanks for the tip, that is a nice kit to convert a Sega cab to Fast IO inputs!

But what I’m looking for at the moment is a input card for a TTX2 unit, which the same seller also has for sale, so I put a bid on that :)

Now let’s hope no one else makes me unhappy by overbidding me :P
 
Just out of curiosity what is the other board you were looking for and was in auction?
Is that fast io for jamma(k91x1204a Fast IO AMP PCB)? Is that a thing?
Sorry to ask questions in your wanted thread
 
The other board has a double function (I think?), my intention was to use it to connect the 60pin cable from my Sega Type 1 IO via the adapter board to get Fast IO in my cab.

I assume the board can also be used to convert any Jamma cab to Fast IO.

Personally I got a Vewlix Fast IO board and wired my own harness for my Sega cab in parrallel to the existing JVS wiring.
So I can easily connect my TTX3 via Fast IO and any other JVS system.
Now I just would like the Fast IO input card so I can connect my TTX2 multi via Fast IO as well ;)
 
PascalP said:
The other board has a double function (I think?), my intention was to use it to connect the 60pin cable from my Sega Type 1 IO via the adapter board to get Fast IO in my cab.

I assume the board can also be used to convert any Jamma cab to Fast IO.

Personally I got a Vewlix Fast IO board and wired my own harness for my Sega cab in parrallel to the existing JVS wiring.
So I can easily connect my TTX3 via Fast IO and any other JVS system.
Now I just would like the Fast IO input card so I can connect my TTX2 multi via Fast IO as well ;)
Click to expand...
thanks for the explanation
 
I'm looking for a Fast I/O for TX2 as well. and I'm not having too much luck :(
 
You must log in or register to reply here.
Back
Top