BilonFullHDemon
Professional
Hi, I have Fighting Layer jap. PCB in verry good condition that is in boot loop, it only shows test pattern for a second and then reboots and all over the same. Do someone know what is the problem? Thank you!
Fighting Layer boot loop :(
- Thread starter BilonFullHDemon
- Start date
chacal231077
Grand Master
Hi! 
yes I am also interested, because I have the same problem with an Ehrgeiz in JVS mode it makes a loop with the I/O board search counter after 5 turns it finds it .
And then the game works 1 minute and reboots.In Jamma mode it starts directly without waiting but after 5 minutes it also reboots.However,
I have a complete capkit, I reflowed everything, flashed the 2 ICs on the motherboard, tested with 3 VideoBoards, it's the same story.
This reboot phenomenon is really strangeI hope that my elements will also make progress for the problem of BilonFullHDemon
yes I am also interested, because I have the same problem with an Ehrgeiz in JVS mode it makes a loop with the I/O board search counter after 5 turns it finds it .
And then the game works 1 minute and reboots.In Jamma mode it starts directly without waiting but after 5 minutes it also reboots.However,
I have a complete capkit, I reflowed everything, flashed the 2 ICs on the motherboard, tested with 3 VideoBoards, it's the same story.
This reboot phenomenon is really strangeI hope that my elements will also make progress for the problem of BilonFullHDemon
BilonFullHDemon
Professional
I swapped rom board and GPU board for other and same effect so for sure something wrong with the mobo. part
chacal231077
Grand Master
Hi!
you say you changed the Fighting Layer Rom Board with another Fighting Layer Romboard or that of another game?
you say you changed the Fighting Layer Rom Board with another Fighting Layer Romboard or that of another game?
BilonFullHDemon
Professional
Other game, I know it wont boot but the effect of boot loop is the same.