I did order one of the new LCD selector but I haven't heard from Frank in a long time. Anyone talk to him lately?
Hi @Brentradio , according to @Frank_fjs this cable is "A 10 pin (5x2) way IDC cable."What's up! Loving my Sega 16B Multi!
Can someone make me a 1 foot extension for my selector? I need to move it as the way I'm mounting the boardset it sticks up too far. An extension will allow me to move it to another place.
I need it to be 1 foot long and have a male end on one end and a female end on the other. Not sure what the 10 pin connector is called. See pic below.
If you can make me one, send me a total shipped and your paypal.
Backgrounds are flawless, controls flawless, sounds flawless. Graphics glitch in and out. I have an entire another batch of fresh EPROMs, I’ll just get busy and try those out. Easy.Please elaborate. I don't understand 'missing half the animated pixels'.
copy. my background is automotive, code is fully over my head. i did watch each chip and all the 322's verified in the same time spec @ 11secs. i will say the legs on the chips have some visible oxidation, i would be more suspect but my wellon would have identified a pin not reading.Something wrong with the sprite data. Looks like a stuck or floating address line too me.
The ZIF (zero insertion force) socket on your wellon, grip the chip legs differently than the PLCC (plastic leaded chip carrier) sockets on the multi. So passing on the wellon doesn't guarantee good contact on the multi. Removing and reinserting the EPROMs from the PLCC sockets is a good way to "clean" the chip legs.copy. my background is automotive, code is fully over my head. i did watch each chip and all the 322's verified in the same time spec @ 11secs. i will say the legs on the chips have some visible oxidation, i would be more suspect but my wellon would have identified a pin not reading.