FOUND EPROM Adapter for 27C400/800/160 and 27C322 16bit EPROMS

[suverman]

Does anyone know where to get one of these for my TL866 Minipro?

 

[awbacon1]

Lol I literally ordered one of these on Sunday. Did it come from Poland? If so it's the exact same model I bought. Need to write some 27C160's

 

[suverman]

https://www.ebay.com/itm/TL866-Prog...27C160-27C800-27C400-16bit-EPROM/282762119108

Looks like it will come from NZ actually... best of luck

 

[awbacon1]

https://www.ebay.com/itm/27C322-27C...405810?hash=item2ad09a6532:g:w4QAAOSwFQFdJk42

I grabbed this one. Will see how it goes! Funny we both needed the same things and have them on order from slightly different sources. I'll leave a review once mine comes in and I test it

 

[DarthMig]

@awbacon1 @suverman That eproms that you are going to program using that adapter are they listed in the minitool software?

 

[awbacon1]

Yes. And the adapters are tested with it. I caught s few YouTube videos showing it working

 

[suverman]

@DarthMig looks like it. Bought from the same seller: http://digicoolthings.com/eprom-programmer-adapter-for-27c400800160-and-27c322-16bit-eproms/

 

[awbacon1]

I just tested the Polish adapter I picked up on ebay here

https://www.ebay.com/itm/27C322-27C...405810?hash=item2ad09a6532:g:w4QAAOSwFQFdJk42

Can confirm it read the 27C160 chip perfectly and matched the reference mame rip file I have. No EEPROM's right now to test burning it but I don't forsee any issues if it read fine.

 

[suverman]

Thanks for this. I still haven't received mine, I will let you know how the TL866II behaves with this. At the moment it doesnt like 27C400 even though there are enough pins.

 

[awbacon1]

I ran the file through a hex comparison app and it checked out 100% bit for bit, so its def a great option for, at the minimum, the 27C160. Id assume it works with everything it says it does but obv haven't tested that

 

[suverman]

The digicoolthings adaptor seems to be reading the chips mentioned in the OP subject, happy with the purchase