What's new
For Sale

stt1

Professional
Joined
Nov 29, 2016
Messages
431
Reaction score
387
Location
Pornainen, Finland
The same selector works for Sega ST-V, 16B, C2 and Irem M72 multi.

For detailed technical and installation info, please check this thread:

Support Forums - ST-V Multicart

For others I'll provide separate instructions (installation to 16B and C2 is easier).


In short: This small board with the LCD screen will be applied with the ST-V multicart board and you can select & load your games easier and faster with it. The board is ready soldered with all parts and the latest software (when writing this: 3.0C) has been uploaded to the Arduino on board. All boards have been fast tested by measuring and also four were randomly picked and tested with real hardware. All boards passed the tests without problems. Final installation does require small soldering (the power and reset wires) work on your own.

You have to have the multicart and ST-V motherboard for getting this to work. This board does not contain any game itself. The design of this board was done by miisalo and he is also responsible about the code included.


The price: 37 Euro per unit + shipping costs.

Payments: Paypal or by bank transfer (if you're in EU you can send me bank transfer without expenses with IBAN / BIC)

NOTE: When paying by Paypal, please select the option "Send money to a friend". The fee will be paid then by you (if you have money already in Paypal account, no fee at all).


Some examples for shipping costs, without tracking (prices including packing, driving to post etc.) - examples are calculated so that package contains one board:

Germany (and most of the other European countries): 10 Euro
USA: 14 Euro
Japan: same as USA


For ordering: contact me by E-mail: staipale512@gmail.com

All orders will be handled in the order I receive them. Total amount will be checked according to your shipping address and I will reply with the needed detail for paying.
Please define clearly how many units do you wish to order, your shipping address and also how do you wish to pay (by bank or Paypal).


For your convenience, you can check my Ebay feedback - my nick in Ebay: stt1


PS. There is also a thread about printing cases for this selector:

3D Printed Sega ST-V Multi LCD Selector Case

NOTE: The cases are NOT included with this selector. It would be lovely to offer them as well, but I have no good access to a 3D printer.
 
Last edited:
All received E-mails answered and so far 4 units sold.
 
emailing now, thanks
 
All E-mails so far replied. Only waiwainl didn't reply me back yet. First 3 units packed and will be sent out tomorrow.

6 units sold & paid, 1 reserved.

3 units are left from this batch.

I'll be off from computer most of tomorrow, but will check my E-mails when it's possible, late evening/night latest.
 
Status at the moment for selectors:

8 sold and payment received.

6 of these also sent by now. Will get also two already paid sent this week.


2 units left from this batch.
 
:)

From this batch is only one now left (8 units have been sent, next shipping day: Tuesday)!

I'll get the parts from miisalo next week for building more. I believe I have next ones ready for shipping after a week.
 
Got mine today and it looks great! Super fast shipping from Finland and packed very well. Plugged it into my PC to verify the software and all looks well. Hopefully I'll be able to test it out this weekend. Thanks!
 
Back
Top