I figured I would put this out there because I didn't see anything like it on the usual 3d printing sites. First 3d model I ever made so sorry if it's rough. I included an STL without the HAS support. I traced around the solder point's so it shouldn't put pressure anywhere you wouldn't want it. Mine is a Rev 14 with the removable battery but I'm sure as like as everythign lines up you could use a Dremel if a solder point hits on another revision pending the mounting holes line up. I printed on an Ender 5 Plus so you probably need a large format printer. 250mm+
Attachments
Last edited: