Monitor for egret 3 has the greenscreen.

[AlonzoRamon]

Hey, wondering what’s the fix for a green screen. It was fine when I moved it in a few months ago. Turned it on after about a month and now the screen is green.

Is this an easy fix? Whether it is or isn’t I would like some info on how to knock this out. Even better if you can send resources the replacement parts needed.

Thanks yall.

 

[trashedcabs]

You are missing red and blue. Quoting myself:

If you're missing a color the basic checklist should go like this:

-Check wiring
-If remote board has color pots, check remote board wiring, pots, header etc
-Check video input header solder (common physically damaged connector)
-Check color drive transistor on neck board
-Check all passives in the color path (caps resistors etc)
-Check tube health on rejuvenator

 

[AlonzoRamon]

You are missing red and blue. Quoting myself:

It was the board for the monitor. All I had to do was adjust it a little and it fixed right up.

Thank you for this.