What's new
By:

MV1C video "jiggling"

Kujako

Kujako

Champion
Joined
Jun 3, 2020
Messages
1,393
Reaction score
842
Location
USA, California
Getting intermittent video jiggling out of a MV1C. Thinking it needs recapping, but would appreciate a second opinion.
Captured out of an OSSC, but I doubt that's the cause...
 
Went ahead and recapped it... man those things are a pain to get loose due to the size of the ground plane. Took way longer than it should have and had to use desoldering gun, hot air and even a small drill (I use to clear my desoldering gun when clogged) to clear a couple of the holes. Seems OK, but too tired to do much more than a smoke test.
 
pierpa86 said:
Have you a chance to try with another scaler like GBS-Control?
Click to expand...
Yes, but not recently. GBSC I have isn't great (from Aliexpress, the one I built is in a cab so can't test with it), OSSC (which is what I primarily use), RetroTink 5x (I can never get these to work well with Neo Geos), and a Medusa scan doubler. I'll see if I can replicate it with another scaler, but other MVS boards don't have this issue with the OSSC setup I use day to day.
 
So I attempted to replicate the issue with other scalers, but the problem seems intermittent which makes it frustrating. Almost looks like a ground loop problem, but I have everything running through furman ground isolating power switches.
 
You must log in or register to reply here.
Back
Top