Big_P Big_p
Professional
Just trying to get an idea of interest. I looked at the battery replacement solutions and didn't find any totally satisfactory, so I have designed a small pcb that can be placed where the existing battery is and replaces the battery with a super cap. No need to cut anything and solves the drainage issues when using a non rechargeable battery (I believe). Basically solder 2 or three headers between my board and your MVS and battery replaced.
I am about to get these printed for myself and a few local friends so an idea of volume desired in the community will help me to work out if i print 10 or 100. Only interest at the min.
I am about to get these printed for myself and a few local friends so an idea of volume desired in the community will help me to work out if i print 10 or 100. Only interest at the min.