SMD88
Student
I just quickly turned my NAC on to test some CPS-II boards I put infinikeys into. Tested first with an SFZ2 with motherboard that I bought ages ago but never tested.
So SFZ2 worked fine, no problems.
Then I tried Battle Circuit and it gave me garbage on screen.
Next was Powered Gear and Pocket Fighter which both worked, but the colours were all wrong. Green is red, red is blue etc. At first I thought it might be the motherboard so I quickly put in another board and it was the same.
I am really praying that my monitor has not died. I have been wanting to re-cap this chassis since I bought it in 2017. I am hoping this is just a matter of the chassis needing a re-cap.
Any advice?
So SFZ2 worked fine, no problems.
Then I tried Battle Circuit and it gave me garbage on screen.
Next was Powered Gear and Pocket Fighter which both worked, but the colours were all wrong. Green is red, red is blue etc. At first I thought it might be the motherboard so I quickly put in another board and it was the same.
I am really praying that my monitor has not died. I have been wanting to re-cap this chassis since I bought it in 2017. I am hoping this is just a matter of the chassis needing a re-cap.
Any advice?
