Namco System 23, power connector type.

[Franco23444]

Hello everyone, I got a time crisis 2 pcb and I plan on making a power harness for it so I can use my time crisis 3 power harness and power supply with a 3.3v power regulator. The thing is that I don’t know the name of the connector used to power up the system. Looks like a sega Naomi power connector but I need the specific name or a link from digikey so I can buy the connector separately. Help would be appreciated!

 

[truxpin]

power connector is JST VL series

 

[Mrhide]

this one
https://www.digikey.ca/en/products/detail/jst-sales-america-inc/VLP-06V-1/9921431

 

[Franco23444]

thanks to everyone!!! I’ll order some today.
Also, I can confirm the system boots up and plays fine. I’m using an original Xbox power supply to power it up. I want to use something else that is safer and like I said, I’m going to use the time crisis 3 power supply and hook up a 3.3v power regulator to one of the 5v trails.

 

[bobbydilley]

Would be interested to know what converter board youre using to display it on your TV, and if the gun works properly when using that board?

 

[Franco23444]

Would be interested to know what converter board youre using to display it on your TV, and if the gun works properly when using that board?

I’m using a Namco RGB to NTSC converter. It originally has an s video connector, but I have also put a rca jack for composite video. It works like a charm on any old crt tv and with any light gun or regular arcade game. From my test, it works with time crisis 1,2,3.

 

[Franco23444]

Well, finally got all the parts in to complete this multi cable of mine. I used a Namco system 246 power cable from a dead system to make a multi cable for my Time Crisis 1 and Time Crisis 2 pcb and it works like a charm! I’m so happy that I can use my Time Crisis 3 PSU now.