Naomi JVS USB port replacement?

[rewrite]

Plugged in the Naomi for the first time in a while, and I get a no I/O error.

Looked around for a bit and now I see that the plastic guide inside my JVS port on the Naomi itself slides up and down a few mm in the metal housing....

Anyone happen to know a part number for that style USB port and/or how hard of a job it is to replace it?

 

[skate323k137]

if its not shorted you can remove the nub blocking the 2nd usb port

If you'd rather keep it clean I prob have a dead filter board I could mail you for parts.

 

[rewrite]

if its not shorted you can remove the nub blocking the 2nd usb port

If you'd rather keep it clean I prob have a dead filter board I could mail you for parts.

I didn't know there was a second USB port :/

Off to the dentist. When I get back I'll poke around. If I fail, I will hit you up for the dead filter board .

 

[twistedsymphony]

you should be able to find replacement ports on digikey/mouser/wheever

 

[Mitsurugi-w]

I've replaced a few. These are the ones I use:

Manufacturer number: 72309-8014BLF

http://www.mouser.com/ProductDetail/FCI-Amphenol/72309-8014BLF/

 

[rewrite]

I've replaced a few. These are the ones I use:

Manufacturer number: 72309-8014BLF

http://www.mouser.com/ProductDetail/FCI-Amphenol/72309-8014BLF/

$22 on eBay, or a 7 week lead time through Mouser! I'll check some other places though.

Thanks for the part number!

 

[Mitsurugi-w]

$22 on eBay, or a 7 week lead time through Mouser! I'll check some other places though.

Thanks for the part number!

You read that wrong! They have 1,307 in stock ready to ship!

 

[rewrite]

$22 on eBay, or a 7 week lead time through Mouser! I'll check some other places though.

Thanks for the part number!

You read that wrong! They have 1,307 in stock ready to ship!

I flipped "On order: 0" and "In stock 1,307"!

Order placed!