What's new

defor

Professional
Joined
Sep 25, 2015
Messages
574
Reaction score
398
Location
Washington, DC
I'm looking for original (or suitable replacements) screws to clamp my two pcb stacks together, and a few years ago i sold off a few dimms with the screws so I don't have suitable comparison.

I find the full stacks (Naomi + Link PCB + NetDimm) rather twitchy at times if the contacts aren't really tight, and I've got no reason to split the stack anymore, so.. yeah.

Anyone?
 
Last edited:

defor

Professional
Joined
Sep 25, 2015
Messages
574
Reaction score
398
Location
Washington, DC
that doesn't sound right to me, but I can try... I seem to remember 4 that are all the same length, a bit longer than that, gold (not that it matters), with thread only near the end)
 

skate323k137

Grand Master
Joined
Jul 23, 2015
Messages
1,315
Reaction score
878
Location
Michigan
For carts all 4 are the same. 3 of those will work, but for a DIMM you need one longer screw, since one of the corners doesn't have a tunnel for the screw to drop in to (the front right corner in this pic)




edit; the 30mm / 70mm are probably for without the comm bd. You might need longer ones all around if you're leaving a link board in between.
 

defor

Professional
Joined
Sep 25, 2015
Messages
574
Reaction score
398
Location
Washington, DC
aha- thanks- I'll try these lengths to start, then look into something longer for the comms board
 

streetfighterken

Professional
Joined
Jul 21, 2015
Messages
571
Reaction score
289
Location
Sioux Falls, SD
I bought some on ebay. They're commonly labeled as "remote control car" parts.
 

defor

Professional
Joined
Sep 25, 2015
Messages
574
Reaction score
398
Location
Washington, DC
Thanks all! I'll give these options a shot!
 

jassin000

Legendary
Multi Boyz
Joined
Jul 21, 2015
Messages
7,758
Reaction score
6,291
Location
Nashua, NH
Thanks for the info, just ordered a package of M3 30mm's from ebay.
Going to permanently attach my Joerg 2-in-1 (CvS2/MvC2) cart to the Naomi. :)
 
Top