Hello everyone.
HELP
Here is my problem that I have on my TTX3.
I recently acquired a lindbergh cabinet and plugged in my TTX3
When I plugged in the hdmi cable there was a big spark.
It caused 2 pbs.
- The screen burned.
- The ttx3 starts but no more signal in hdmi. And no beep even when I remove the rams.
So the origin of the problem comes from the fact that the screen moved during transport. the frame of the chassis has touched a radiator of the power supply board of the screen.
Indeed, the old owner changed the lcd screen and the original frame fell on the lcd power supply board. he had shifted the card (but not well fixed) and the transport came to move the card which touched the frame (I noticed the burn between the frame and the radiator). So I changed the lcd power supply and adapted the frame . it's now fixed.
My problem : TTX3.
I changed the power supply and the cpu (core i5 2400) and nothing new.
If I remove the card that manages the fast io the pc starts and stops
When I put it back it starts but still no signal.
On the other hand, there are flashing LEDs and I wonder if this board for fast io has not taken a hit.
Here is a video of the flashing leds https://u.pcloud.link/publink/show?code=XZFCbCVZzbq2bWNqFizv1DERh8FvL7Ix3nlV
So can anyone help me / have an idea?
Thanks for reading and your help.
See you soonthx
HELP
Here is my problem that I have on my TTX3.
I recently acquired a lindbergh cabinet and plugged in my TTX3
When I plugged in the hdmi cable there was a big spark.
It caused 2 pbs.
- The screen burned.
- The ttx3 starts but no more signal in hdmi. And no beep even when I remove the rams.
So the origin of the problem comes from the fact that the screen moved during transport. the frame of the chassis has touched a radiator of the power supply board of the screen.
Indeed, the old owner changed the lcd screen and the original frame fell on the lcd power supply board. he had shifted the card (but not well fixed) and the transport came to move the card which touched the frame (I noticed the burn between the frame and the radiator). So I changed the lcd power supply and adapted the frame . it's now fixed.
My problem : TTX3.
I changed the power supply and the cpu (core i5 2400) and nothing new.
If I remove the card that manages the fast io the pc starts and stops
When I put it back it starts but still no signal.
On the other hand, there are flashing LEDs and I wonder if this board for fast io has not taken a hit.
Here is a video of the flashing leds https://u.pcloud.link/publink/show?code=XZFCbCVZzbq2bWNqFizv1DERh8FvL7Ix3nlV
So can anyone help me / have an idea?
Thanks for reading and your help.
See you soonthx