Replacement CPS2 Buttons (3D Printed)

[twistedsymphony]

So I'd attempted to reproduce these buttons before but I couldn't get them to print reliably and the original button design lead to the 3D printed version quickly cracking and breaking under stress just like the originals.

Recently I designed something for another project that gave me an idea on how I could re-design the CPS2 buttons and I'm really pleased with the results so far. They look and work like the originals but each button is a separate piece and the mounting bracket provides a "cup" that the button hinges in, the result is that these will never crack and break from use like the originals! Even better is you could potentially take the broken original buttons, trim them to the right length and use my bracket to have a 100% original look from the outside. I haven't tested this myself as the only broken CPS2 button set I have has been repaired and I'm not about to intentionally break it to test this hypothesis.

BUY THESE ON Bit-District

or

DOWNLOAD THE FILES TO PRINT YOUR OWN

 

[udongein]

Looks good! The original buttons on the CPS2 are like the "Big Rigs Racing" of hardware design. (Youtube it if you haven't seen it yet, lol). I had to glue my buttons since they cracked but it seems to be holding up for now. I think I just won't touch them anymore and hope for the best, but it's good to know your design/printing is available in case. Your stuff always fits great.

 

[nem]

Very clever!

 

[twistedsymphony]

available for purchase or download.

I only have a small quantity of blue and green available currently, but will be adding orange, yellow, and gray.

If you're interested in one of those colors let me know and I'll get the inventory up sooner.