What's new

WTB Sega Astro City Marquee Plexi - Need to Replace- New Repos?

Want To Buy

FluxChiller

Professional
Joined
Dec 19, 2018
Messages
243
Reaction score
309
Location
Fairfax, VA USA
Looking to replace the plexi in both the top and bottom slots of the upper housing. Does anyone make a repro?
 

Attachments

  • plexi.png
    plexi.png
    98.2 KB · Views: 109
If you have trouble finding them. I can possibly sort you out with an original set.
 
It's one big piece and it's really difficult to remove from the housing without it cracking. I tried using hot air to soften the adhesive holding it place, but it just warped the plexi.

Maybe submerging the whole housing upside down in a tub of mild dishwasher soap solution and leaving it there over night would do the trick?
 
Appreciate all the replies so far!

So I was able to remove my current plexi set with no problems, however, even before removing them the printed graphic on the back is both scratched in a few places and severely faded.

I actually ordered a set from yaton/ebay link a few weeks ago and waiting for it to arrive.. however I have little faith its going to be in any better condition that what i have now, so I have already mentally decided that whatever comes is most likely going to be a worst case scenario spare for my machine or another.

Sheep, do any of the extras have, are the graphic still vibrant with the pink stripes and yellow/green astro city in the middle (most all have faded to being white.)
 
Back
Top