SOLD Sega Blast City - Chicago

[Triple3fast]

***SOLD***

Blast City. It's set up for Jamma/Chamma. Kortek CGA monitor (no burn in). The bezel doesn't fit perfectly on the machine because of the curvature on the monitor (OEM frame though). It needs longer bolts to sit back further or the bezel could be sanded down to fit properly. An additional untested Kortek chassis will be included. Works 100%.

Located in Chicago. Pick up only. Cash. $1250.

Photos: https://flic.kr/s/aHsmUA8tyf

 

[pirategz]

Can it fit in a 30” door?

 

[klee123]

Can it fit in a 30” door?

You'll need to detatch the control panel for it to fit through.

 

[djsheep]

It will fit if it’s exactly 30”. I have taken a Blast through a doorway that’s 75cm which is 29.5”

 

[klee123]

It will fit if it’s exactly 30”. I have taken a Blast through a doorway that’s 75cm which is 29.5”

Good to hear. I may have a blast coming in next week and I had concerns with fitting it through when factoring in the door.

 

[pirategz]

Beautiful machine!
I would like to take it if you can fix that frame issue.

 

[pirategz]

It will fit if it’s exactly 30”. I have taken a Blast through a doorway that’s 75cm which is 29.5”

Thank you!

 

[JohnRambo'sKnife]

Try backmounting the monitor in the existing frame and using some closed cell foam to deal with the gaps. I did this with a PFX in my Blast way back and it came out very nice.

 

[Triple3fast]

Sold!!!