WTB Sega Model 3 soundboard (DSB2) for Spikeout FE

[tsangpopohk]

Hi, I would like to buy a DSB2 for Spikeout FE. Modified board from other game is also ok but must working. My budget is about $150, thanks.

 

[jasonm737]

I have a DSB2 board but its currently got Scud Race on it. If you want to take it and get it updated to Spikeout, I'm happy to accept an offer for it.

 

[tsangpopohk]

I have a DSB2 board but its currently got Scud Race on it. If you want to take it and get it updated to Spikeout, I'm happy to accept an offer for it.

Thank you for your reply. I found that except the DSB2 board, there are 2 small pcb ＆ harness is necessary. Do you have it?

 

[PaulWoodpross3r]

I have a DSB2 board but its currently got Scud Race on it.

Scud Race used the DSB1 sound hardware. I do have a DSB2 from a Sega Rally 2 cab but I swapped it with Daytona 2 ROMs; however when I track down SpikeOut, I myself would be after another DSB2.
@tsangpopohk - IDK if this site ships to Hong Kong, but I have seen fairly priced DSB2 boards on Coin-Op Parts Etc. They're in Connecticut USA. Some of the items they sell are used and sold AS-IS, but the Scud Race DSB1 I bought from there does work; I just needed to clean it and dust it off as it was playing scratchy music at first. To swap the ROMs out I recommend you grab a Jonard chip puller as a flathead screwdriver can bend the legs on the chips.

 

[tsangpopohk]

@Woodpross3r (ConversusWV) - Thank you very much for the recommendation.! I will have a look at it.