NFGx
Grand Master
I picked up a bunch of these little voltage displays in Japan. They're a common enough part, but they don't really look great strapped to a wire bundle, so I whipped up a standing holder for them.
Figuring on 5 and 12 Volts, or 3.3, 5 and 12 Volts, I did a 2- and 3-bay version. The displays fit snugly, and will stay attached to the top without any assistance. The bottom uses a couple of heat-press M3 inserts and a pair of screws hold the top on.
Very pleased with this, I must say. From thought to proto to final version took about 2 hours and only two rough attempts for sizing. ^__^
Figuring on 5 and 12 Volts, or 3.3, 5 and 12 Volts, I did a 2- and 3-bay version. The displays fit snugly, and will stay attached to the top without any assistance. The bottom uses a couple of heat-press M3 inserts and a pair of screws hold the top on.
Very pleased with this, I must say. From thought to proto to final version took about 2 hours and only two rough attempts for sizing. ^__^