astro_zombie138
Champion
I recently got a Strikers 1945 II PCB non-working. It's missing the crystal oscillator. Looks like it was ripped off in a very abusive manner. The trace from the oscillator to the big ass psikyo labeled chip in the middle has been completely removed as well. It appears the pins from ground and +5v are good. There's a 4th connection that I don't know the end point to. My question is can someone verify where all 4 points to the oscillator end up on the pcb? If I connect the ground, 5v, the 4th pin and what I suspect is the correct pin to the big ass psikyo chip, I just get vertical colored lines on screen with no signs of life. Sound is not playing but the amp reacts if I touch the pins with my finger. I don't have a matching crystal of 57.27272mhz but have a 56mhz crystal in place. Thank you to whoever can help me!