SUZOHAPP VisionPro

[brendan1495]

Hi all, I have just bought a SUZOHAPP VisionPro for my cab and I am having a bit of difficulty wiring up the CGA/EGA to the jamma harness, obviously I can understand the RGB/ Ground and sync (I presume H/C but which one?) and I dont understand where the V+ and v- come from. Could anyone point me in the right direction and let me know which wires go to what. I have attached a picture of the pinout.

Thanks

 

[notsonic]

Jamma sync goes to pin 1, that's all you need.

 

[brendan1495]

Jamma sync goes to pin 1, that's all you need.

Cheers will give it a go