Dreygor
Grand Master
I know this is mostley a place for modern cabs but here goes nothing....
Up for mainly trade (maybe sell if someone makes an offer I can't refuse) Is an original dedicated Burgertime. I am in Midway, GA which is about 35 mins south of Savannah and about two hours north of Jacksonville, FL.
This is actually a grail cab for me however it's also a thorn in my side.
I have two PCB sets for it. One works except I can not get it to coin up and the other works except it is stuck in test mode. A tech in FL fixed the test mode once for me and it was working perfectly for a while then it decided it wanted to act up again. The coin up one probably just needs some wiring switched but I have not had the time to trouble shoot it.
When I got the cab the power supply did not work, so I replaced it with a power modernization kit from arcadeshop.com.
Over all the cab is in players condition except for the back door which was water damaged which is odd as the rest of the cab shows no sign of it. I was going to cut a new one on my CNC machine but have not gotten around to finish putting the CNC machine together. I do have the wire vent grills for this also
The screen is nice and bright and works very well with just a little burn which does not show when the machine is on.
I have all of the original parts that came with the machine should you wish to attempt to convert it back. It will also come with both board sets, a Midway to JAMMA edge connector, original manual, and all extra parts for it. It is missing a coin mech and the owner prior to me jury rigged it with a push button to coin up since the game does not have a free play unless you get the PCB modified.
Here is where I am at on this cab. If I decide to send the boards off for repair or figure out what's wrong with it the cab will come off of the market. I am on the fence with this in the first place.
What I am looking for is mainly looking is a trade. I am looking for a Japanese candy cab that is in good, complete, playable condition, that does not require any monitor work. This includes but not limited Sega Blast City, Taito Egret II, Irem Madonna, Capcom Q GrandAm 25, Vewlix, SNK Neo 29, Konami Windy II or something like that. I will consider Chinese or Korean clones if they are really close to the whatever they are cloning and in really great condition.
As with anything I sell PM me with offers, or thoughts on a trade
I am pretty easy to get along with.
Also as a side note I will be delivering some cabs to Jacksonville, FL this coming weekend and could deliver this also.
Up for mainly trade (maybe sell if someone makes an offer I can't refuse) Is an original dedicated Burgertime. I am in Midway, GA which is about 35 mins south of Savannah and about two hours north of Jacksonville, FL.
This is actually a grail cab for me however it's also a thorn in my side.
I have two PCB sets for it. One works except I can not get it to coin up and the other works except it is stuck in test mode. A tech in FL fixed the test mode once for me and it was working perfectly for a while then it decided it wanted to act up again. The coin up one probably just needs some wiring switched but I have not had the time to trouble shoot it.
When I got the cab the power supply did not work, so I replaced it with a power modernization kit from arcadeshop.com.
Over all the cab is in players condition except for the back door which was water damaged which is odd as the rest of the cab shows no sign of it. I was going to cut a new one on my CNC machine but have not gotten around to finish putting the CNC machine together. I do have the wire vent grills for this also
The screen is nice and bright and works very well with just a little burn which does not show when the machine is on.
I have all of the original parts that came with the machine should you wish to attempt to convert it back. It will also come with both board sets, a Midway to JAMMA edge connector, original manual, and all extra parts for it. It is missing a coin mech and the owner prior to me jury rigged it with a push button to coin up since the game does not have a free play unless you get the PCB modified.
Here is where I am at on this cab. If I decide to send the boards off for repair or figure out what's wrong with it the cab will come off of the market. I am on the fence with this in the first place.
What I am looking for is mainly looking is a trade. I am looking for a Japanese candy cab that is in good, complete, playable condition, that does not require any monitor work. This includes but not limited Sega Blast City, Taito Egret II, Irem Madonna, Capcom Q GrandAm 25, Vewlix, SNK Neo 29, Konami Windy II or something like that. I will consider Chinese or Korean clones if they are really close to the whatever they are cloning and in really great condition.
As with anything I sell PM me with offers, or thoughts on a trade
I am pretty easy to get along with.Also as a side note I will be delivering some cabs to Jacksonville, FL this coming weekend and could deliver this also.