The Other I found a interesting open source board called Dek's RBG to component Transcoder. This actually looks like something I would love to try but reading at the notes I found that some resistors will have to be a different value for Arcade boards
"For arcade boards you will need to attenuate the RGB signals to a level that a normal consumer CRT will accept (ie 3-5V p-p down to 0.7V p-p) - this can be done altering the resistor values."
For the wizards over here. Do you know what resistor will need to be different and the value of them?
This is the Githup page.
https://github.com/dekkit/RGB-to-Component-Transcoder
I will definitively send a donation to this person. This is a great tool
"For arcade boards you will need to attenuate the RGB signals to a level that a normal consumer CRT will accept (ie 3-5V p-p down to 0.7V p-p) - this can be done altering the resistor values."
For the wizards over here. Do you know what resistor will need to be different and the value of them?
This is the Githup page.
https://github.com/dekkit/RGB-to-Component-Transcoder
I will definitively send a donation to this person. This is a great tool
