What's new
By:

FS  Vewlix F with HD Monitor, 2P CP, Brooks Fighting Boards (Consolized)

For Sale
X

Xenon64

Beginner
Joined
Dec 22, 2015
Messages
5
Reaction score
5
https://www.shadaloo.eu/index.php?route=product/product&product_id=284

Basically this with a 2P Vewlix Repro control panel + Brooks Fighting Boards for console/PC play. Full Jap. SFV artwork, sound kit w/ Amp/Subwoofer -- 1080p monitor with multiple inputs for quick switching between PC/Console/JVS.

Nothing wrong with it at all -- tested w/ PC, and all modern consoles!

Received as a gift, but I really don't play it very often at all -- a pinball machine would be a much better fit in my condo anyway...

$3000 or best offer. Local pick-up or shipping coordinated by buyer. Located in Ocean City, MD

Pics: https://imgur.com/a/iqG5B5B
 
Sale Pending -- thank you for the interest. Will update once sold or if still available.
 
Good question:

Since the 2P control panel is connected to two Brooks FIghting Boards, there are two USBs to work with. So in order to facilitate quick switching between console/PC/JVS for the controls, I have a USB input switcher in which one end is connected to the console, one to a USB 3.0 Hub connected to the PC, and one to the JVS board. The control panel USBs are plugged into the USB 3.0 hub directly. This allows me to use the input switcher to quickly change controls based on what I'm playing.

Something like this: https://www.amazon.com/Sabrent-Comp...a-73ca-403a-923c-8152c45485fe&tag=rgonsite-20

Similar thing for audio -- since consoles like PS4 use digital audio, I have a digital to analog converter, and from there I can plug both the PC and console audio out to the USB switcher so I can swap audio from one to the other.

Something like this: https://www.amazon.com/STEREO-Manua...+switcher&qid=1621999897&s=electronics&sr=1-4
 
Oh cool! I think I have that same setup minus the usb hub. I'm using a jvs io though, I have the brooks but hadn't set it up yet.
 
This is something I would like to know how to do because my Vewlix Diamond Orange is currently using Taito Type X3 with JVS I/O. I've ordered Vewlix Console I/O V3.0 a while back thinking of hooking it with my PS3 but end up with the Type X3 instead. This method is the quickest way to switch between systems. Can you have pictures of how it's hook up so I can see it visually. Thank you in advance.
 
Last edited:
You must log in or register to reply here.
Back
Top