- Thread starter roy
- Start date
Have anyone tried this one btw (KS Tools 500.7775)?
https://www.amazon.se/KS-Tools-500-7775-Finmekanik-lyftanordning/dp/B07QQ7WQCX
It's almost a third the price of the wera.
I mean I already have a wera... but only one, so got sortof curious about this one. At 3.3eur incl shipping with Prime it cant really go too wrong, so guess I'll know in a few days.
https://www.amazon.se/KS-Tools-500-7775-Finmekanik-lyftanordning/dp/B07QQ7WQCX
It's almost a third the price of the wera.
I mean I already have a wera... but only one, so got sortof curious about this one. At 3.3eur incl shipping with Prime it cant really go too wrong, so guess I'll know in a few days.
trashedcabs
Professional
I took a random crappy small flathead and bent it--works great 
I use chip lifters from Wiha. The two I have are great.
Wiha 279-10:
Wiha 27922:
They're easily got from Digikey: https://www.digikey.com/en/products/detail/wiha/27922/11585736 -- a good item to add if you need to make up minimum spend for free shipping.
I love Wera tools though, I've been using their screwdriver set for a year in the arcade and they're top notch!
Wiha 279-10:
Wiha 27922:
They're easily got from Digikey: https://www.digikey.com/en/products/detail/wiha/27922/11585736 -- a good item to add if you need to make up minimum spend for free shipping.
I love Wera tools though, I've been using their screwdriver set for a year in the arcade and they're top notch!
I have this one, love it.
ForestOfDreams
Professional
Thanks! Bought one.
This is the one I use also. I own 3 of them so I can have one in each of my typical work areas and always have it at arms reachWiha 279-10:
Received this one. Its a little bit thiccer both on handle and on the prying part than the wera but seems perfectly fine.
At such low price I can 100% recommend it
Sp33dFr34k
Champion
I own a lot of KS Tools stuff, good quality. Can't go wrong at €3,22 so also ordered one, thanks.
