Trol
Professional
Board didn’t boot,
what I normally do on boards with a lot of smd chips is flexing the board to see if something happens on screen.
It started right up with pressure at the right place, so some chips need to be reflowed.
Narrowed down the fault to the cram chips or the cpu.
Reflowing the cpu gave me a full woring board.
Sorry, another easy fix
what I normally do on boards with a lot of smd chips is flexing the board to see if something happens on screen.
It started right up with pressure at the right place, so some chips need to be reflowed.
Narrowed down the fault to the cram chips or the cpu.
Reflowing the cpu gave me a full woring board.
Sorry, another easy fix
