I recently bought and installed an X-Station ODE into my SCPH-1001 Model PS1. I didn't like any of the mounting solutions I saw online. I wanted one that looked cool let me see the X-Station logo on the ODE and still allowed me to see the LEDs. I also wanted some additional SD-Card storage So I designed this tray. I feel this design ticks all the boxes.
Requires the use of a single screw to help secure the X-Station to the lower part of the tray.The screw I used is steel thread cutting screw: #4-40 Pan Head, 3/16" in length
you can download the design here: https://www.thingiverse.com/thing:6687459
If you print one of these please post a picture of your make (I love seeing them) and if you do make these for others then I'd ask that you give credit and post a link back to the thingiverse page. Thank you.
Requires the use of a single screw to help secure the X-Station to the lower part of the tray.The screw I used is steel thread cutting screw: #4-40 Pan Head, 3/16" in length
you can download the design here: https://www.thingiverse.com/thing:6687459
If you print one of these please post a picture of your make (I love seeing them) and if you do make these for others then I'd ask that you give credit and post a link back to the thingiverse page. Thank you.
