I haven't had any shutdown issues just the sensor is crosshair is jumping like hell when trying to initialize and you mean the 24v PSU or the main one thats a ATX PSU?
Oh, I misunderstood then, I thought you said that your system shut down. 24v shouldn’t really have any issues as it’s just used for the motor. You need to check the 5v on your PSU and see if it’s good. Also check the 12v on your CCD camera and check if that’s good. The original Sony Namco CCD cameras have a pot on them to adjust the brightness.
Don't Have it sent off as you need to change the holes for the screws you want to use...again I can pick it back up in the near future!Oh, I misunderstood then, I thought you said that your system shut down. 24v shouldn’t really have any issues as it’s just used for the motor. You need to check the 5v on your PSU and see if it’s good. Also check the 12v on your CCD camera and check if that’s good. The original Sony Namco CCD cameras have a pot on them to adjust the brightness.
Oh righty then, I’ll try your 3D gun and I’ll 3D print it out. I don’t have access to a 3D printer but I can use one of those 3D printing sites.
I just saw the video and I am very happy that everything turned out pretty well! I actually did find 2 brand new old stock Crisis Zone gun shells almost a year ago for dirt cheap. I unfortunately sold one earlier this year as I needed to fund another project, however, I still have the other one in pristine condition! It’s still in its bag.
It was saved from being trashed, I literally paid a person in the other state to ship it to me, so they don't throw it away.Man! It’s so cool you guys have actual cabinet parts or full cabs but I don’t have any lol! I only got the hardware! All three versions of the games: Japanese, American, and censored European.
May be, my original motor was not usable at all to compare.
Okay I’ve already ordered the 12v 1,000 rpm. The 12v should be fine? Or do I need 24v because it’s stronger?
Power supply feeds 24v to the motor (European version 18v).
Thanks! Well, I don’t have any things from crisis zone stuff only motors. I’m looking for 3D models of crisis zone machine gun. If not I might buy from Hong Kong website 99 usd per gun
I you have a working link for the camera ? and you can tell me all the spec of the camera you have buy , I need to replace the camera in mine cab, but I have the original bracket and ir filterOk picked up a CMOS camera from aliexpress, this one
https://www.aliexpress.com/item/32813575552.html?spm=a2g0o.order_list.0.0.4b071802eISWUa
pretty impressed with the image quality for what it costs, there is a little joystick built into the cable to control the OSD and it can be switched into black and white only mode.
Since there is little to no details on the LEDs used by NAMCO and I don't own a spectrometer I also picked up two different narrow band IR filters on a best guess basis from what was available, 850nm & 940nm (also knocked a up a case for the camera so the bare PCB isn't floating about on the bench).
No IR filter in use
850nm made little difference
940nm
Pretty easy to guess the approximate wavelength based on those images.
Not that it really matters to anyone here but it's worth noting that the standard and deluxe crisis zone guns actually use different LED boards and apparently (according to the schematic) one uses a 12V supply for the LED and the other uses 5V.
I'm interested in a crisis zone gun pcb, I have write you a PMThank you so much! If you ever want some high res pictures of the Crisis Zone gun, tell me as I have a brand new old stock gun.
Sorry I haven’t responded back, tbh, I kinda gave up on this project
