Recent content by Brettster

Yes number 2 size or P2 is the one that worked best for me

No Bolts just very long screws that hold the front to the back, which is why a quality JIS screwdriver is essential, take it easy and you shouldn't have any issues :)

Sega cabs are really well made, the cables and harness are modular, so long as you take some photos before you unplug something, you should be OK the Monitor has a power, and video cable to unplug, and there's also the remote board for adjustments under the control panel. make sure you unplug...

Have taken 2 apart to get them into my house, 3 doors and a narrow hallway. As mentioned, make sure you have the right screwdriver, no2 JIS worked perfectly for me make sure you have someone to help you with the monitor, unless you are going to lay the cab on its back first This is the...

This One has been my go to JIS screwdriver for many years now. used it on both my NAC's to totally strip the cabs even those really tough ones on the 2 halves of the shell, never stripped a screw... yet!

Welcome :)

Had some time today so fit the NNC Kit. Works perfectly and out of all my cabs, this is the easiest one to fit, less than 5 mins :) Works perfectly with coins, and the button being on the CP, is the most convenient one too View: https://youtube.com/shorts/p6wKBS0L7SI?feature=share

Is the blue on the 2nd picture a light or corrosion on the PCB? looks a bit nasty around the caps in that area, IC22 might be fine and something else is the main issue. worth checking continuity etc first

Any room for another one in the discord please?

I Would also really appreciate an X input option too, Icing on the cake would be compatibility with PS and Xbox consoles

That case looks awesome :)

It looks like a normal LCD 1080p screen to me, the Touch Panel is separate and connected to the PC via USB There is a download for the Manual which you will find in the owners thread, it goes through this process of replacing it, Manual is in Japanese of course. Edit, Link to the thread...

map the button for the test switch, and press and hold it to access

I just need to swap the harness connectors, I unplug the P1 P2 connectors under the CP a I have 2x PS360 boards with the corresponding connectors that the CP plugs into, 10 second job, The monitor has 2 inputs and I've got a splitter for the sound from both systems.

It's been great, I have the X3 and a Steam PC hooked up so I can play the older stuff and modern without issue, Had it for nearly 10 years now. Great cabs