Search results

I’m very interested in this for my 31k-only Naomi Universal! I’ve been using my OSSC for the time being, and would love to allocate that back to my plasma. Are you accepting pre-orders at this point?

Nice guy, great product. Happy to support any projects you may entertain in the future!

You can run Mario Kart GP & F-Zero AX off of a modded Wii very easily with a GameCube controller. (The TriForce arcade hardware is based off of the GameCube.) A lot of the titles you mentioned have very solid console ports. (I personally prefer a proper port over emulation, but that’s just...

@KingSopz How is the OSSC connected to your display, and what kind of display are you using? There is a little switch on the HAS near the kick harness connector and the AV out--try flipping that? (I believe that toggles the CSync Processor between a few different options, but check your HAS...

I told you in an earlier reply here that it was not a matter of using the incorrect DVI-to-VGA cable. (I had two, they both worked flawlessly with the OSSC, the exact Nanao monitor and a few different consoles, so they could safely be eliminated as the problematic variable in the sequence.) You...

I have the CPS2 version (18-in-1) and my experience with it mirrors that above. Solid game list (there are only a couple that I miss, and a couple I could do without.) There isn’t a paralyzingly number of titles to parse through, and for someone with only a single cab, it’s a quick and easy way...

I'll take 2 x Saturn, and 2 x GameCube if you have any of those available? Inboxing you.

I tried moving the jumper on the CSync Processor to 'unbuffered' (see photo) and between this, and finally updating the firmware on my OSSC to the most recent version after being stuck on a legacy version since I picked it up, I was able to get things working flawlessly! It wasn't a matter of...

I was affraid that you may say this, and you very well could be right. I'll do a little more experimentation with it. Thanks @RGB

So I am able to output a Saturn to the same monitor via the OSSC without issue, just not the CPS2. Good catch on the monitor frequency typo. As I mentioned above, I am able to successfully output a Saturn to the same monitor via SCART and the OSSC. The CPS2 is the only piece of hardware that is...

Hey RGB, I'm having some issues getting sync with my HASv3, OSSC and CPS2 18-in-1. (The CPS2 and the HAS works fine via SCART, but when I bring the OSSC into the mix, things take a turn...) My setup is as follows: -CPS2 18-in-1 (the weird little daughterboard between the CPS2 and the HAS is...

Hi there, If possible, please add me to the list, thanks!

I have an extra, unused pair of Dreamcast cables. I’m looking to straight up trade for a pair of Saturn cables. Any takers?

Hey RGB, Do you have any of the HD15 adapter PCB's in stock? I am interested in one of those, and 2 x Saturn controller adapters if available. Thanks!

It's not difficult to dismantle, but it can be a little daunting at first. Just make sure you have the proper tools/hardware to do so, so you don't strip the hardware. Do yourself a favour and replace all of the hardware with new stuff that doesn't use the weird Torx security standard. I have a...

@twistedsymphony Unfortunately, I’m missing the control panel inside my cab as well! I’m not exactly sure why, but it’s gone. I will post some photos of my monitor and the wiring I took last night when I had the back removed, so any knowledgeable parties can chime in as to whether it’s there or...

So as it turns out, I was able to remove the cover off the back, and adjust some of the pots (H-size, V-size, H-pos, V-pos) on the chassis in addition to on the tethered remote board, and to greater effect. It strikes me as odd that they would have repeated controls on both, but it worked, so I...

Thanks for the reply @twistedsymphony I have only owned this cab for about 18 months, and I have not done anything to the monitor, maintenance-wise. I doubt the previous owner did as well. Right now the cover is on the back of the CRT, but is it possible that I could adjust the H-width and...

Thanks for the reply @ThisGuy I just realized I entered the wrong monitor model number -- I have an Nanao ms 2932 (31khz only model!) I don't think I have this feature on mine.

I have a Naomi Universal cab with a Nanao MS-2932. The monitor is pretty decent for the most part (despite being 31khz-only) but I feel like the displayed image is too small for the size of the monitor. Specifically, I feel that it isn't taking up enough real estate, and leaving about an 1"...