Search results

Taito Vewlix Diamond Orange arcade machine. The cabinet itself is very clean, no smoke smell. Upgraded 1440p monitor with Hadouken brackets. Original Taito 1080p monitor and bracket is also included in the sale should the owner wish to revert to stock. The cabinet is running a Taito Type X3...

I can only recall seeing that cart in clear blue like you mentioned. Be careful with the contact cement, it can sometimes leave what looks like a grease stain if the paper absorbs too much. I’ve had better success using 3M double sided tape, taking my time, and cutting nicely sized pieces of...

It’s often difficult to walk the line of keeping something like this watchable for everyone. I know it’s pretty elementary for this crowd but I always hope I can pique the interest of a few mainstreamers and show people there’s a whole other world out there beyond Zelda.

Can confirm that a second Apacer 4GB DOM I tried DOES work. So I have one that does and one that doesn’t. Both work in Windows and I wrote each of them with CHDMan. I can also confirm that swapping the battery on the board fixes the max volume setting at boot. That’s been a really annoying...

I may have been able to reuse what was there, it’s been a while and I can’t recall. Either way, the tubes always come with small holders you can mount if necessary. Wiring is pretty straightforward. There are two white wires, one ties to hot (black) and the other neutral (white). For the...

Yes, that looks like the same adapter. I’m using 4GB cards (Transcend and Verbatim), not sure I have anything on hand that’s smaller.

That probably explains why the plastic connector is broken on my board. But no, I knew the correct orientation from the ribbon cable that was attached when I got it. Good thought though.

I sure have. It’s bizarre. I’ve always assumed these were just pass throughs.

I don’t know if anyone else has experienced this, but I’ve never been able to get a CF adapter that plugs directly into the board to work. The first two pictured are a no go (set to master or slave, I’ve tried it all), but the third with a ribbon cable works like a charm every time. This is...

She’s gone already chief, in the wind. 😂

I was curious enough to take a look at one of these. They’re every bit the hack job everyone says they are. I wouldn’t have cared, I figured as much, but mine has graphical glitches throughout. Easy return (so far) though.

I bought a 3ft integrated LED tube and called it a day.

I’ll take one.

Thanks, but the power is pretty solid. I’ve been using his power box pro. Voltages measured at the board have been good. I’ve even tested them when this happens (black screen) and everything at the board level seems fine.

I’ve had the Mini for a few months now and it has been fine for most everything I’ve tossed at it. Recently though I’ve had it drop signals after a few minutes of play. The picture slowly fades to dark with some noise and then goes completely black. It’s happened with multiple boards.

Wow, I sold too early. 😂

Looking for the Sound I/O to a Midway Vegas setup. This is the board the Jamma harness plugs into.

Redid an entire cabinet for this last summer and don’t regret it. It’s a fun game and as others have mentioned the audio tracks are awesome.

I’ve been looking for one myself. I’ve seen quite a few broken ones the past few months.

Unit only. Fully functioning and ready to go. $89 shipped in U.S.