Search results

got a question for the same PSU 400-5198-01 whats the value for the VR1 trimpot that adjust 5V anybody has an idea it needs replacement has markings 13L have no clue try to find code value with no luck also try to measured the resistance i get different values

hello i see what your taking about i just received a board from japan and was wondering if still had the original battery or was replace or the board has a phoenix ROM set i opened it and found this cpics2 never seen it then google it is a decryption keys chip i try to investigate and looked at...

so for my problem i back track and found that i was running old multi bios ones i burnt a new bios in both mother boards everything started working again i let system run for hours in demo mode no problem

Hello am running into similar issue, I just did a fan replacement and got same set up with DIMM and just stopped working I get a black screen system don’t even boot but if I switch to a regular cart system works and game boots with no problem wondering if something failed inside DIMM cartridge...

Hello guy’s I just wanted to make a post to this support thread, I finally gather all necessary pieces to put this kit together ran into some issues setting things up and all answers wore here, here a picture running with no issues since I can’t post videos thank you guys for the support

A boards or C boards

do you have this boards for sale ???

thank you for the info I'll will contact him and ask if it has the boards thanks again

hello sheep_nova i was refer to you by another member i just got my CPS1 multi kit and i need an A board and C board i was wondering you can help me out thank you

thank you ShootTheCore exactly what i needed thank you also got the ROMs as well now all is left is to find an A and C board didn't know that it requires also a C board

another question about this new multi kit where i can find the instructions and ROM set compatible for this kit if anybody has an idea please let me know dont want to mess up this kit by not following the instructions thank you guys

thank you for taking the time to respond, is going to take sometime till i find one

hello guys getting prepared to get my CPS1 multi kit but dont have an A board can any one have one for sale or can refer me to some one please thank you

Looking to buy an Astro city cab around chicago

Hello guys question nobody here know a good place to buy or search info in where I can find an Astro city cab around Midwest I’ll appreciate some info

hello please add me to the list am interrested in this kit

Hello guys I just want to update you guys with this mod problem Danexmurder point out that the coax cable could be the source of this problem so I look thru my stuff and I found another thicker coax cable so I solder it try and here it is perfect picture, no interference, sound all good now, I...

Hello guys am back with some improvements, I solder the 3 jumpers I didn’t because of the place I got the instructions this step wasn’t there, then check resolder the pins on the chips and re test, now the colors are good got sound but the pictures comes and goes and there’s some lines in...

thanks for the suggestion Velyks , and yes I didn't solder those three jumpers, I wasent aware about those jumpers I just followed instruction from web, I will solder those jumpers today and about the color problem I will recheck pins onto the chips, yes with my supergun am getting everything...

Hello guys so am back, with some interesting stuff, after checking some turned out that HDMI cable was causing the problem with no picture, so now that I have picture the colors aren’t right and have no sound, I recheck everything I couldn’t find any problem with installation, am using an USA...