- Thread starter Derick2k
- Start date
RGB sells the kick harness you need for your HAS supergun.
I sell them. This is what you need: https://www.ebay.com/itm/233945015679
Slightly cheaper one: https://www.ebay.com/itm/234094761033
CHAMMA uses a couple of pins that are ground on JAMMA for buttons 5 & 6. You can get CHAMMA to JAMMA adapters that break out these pins into a standard kick-harness.
Example: https://www.mikesarcade.com/cgi-bin/store.pl?sku=JA-CHAMMA
But if your cabinet is wired for CHAMMA already, you would need something that goes the other direction. Or rewire it for JAMMA.
@USHIMATA for reference, here is my HAS Minigun hooked up to my Chinese CPS1 multi JAMMA board. You can see the kick-harness running from the Minigun to the CPS1 "B" board. Because I'm disorganized it's going from the HAS to CPS1 kick harness to CPS2 style before going back to CPS1. Can't remember why I did that...
Last edited:
I remember some talk about needing to wait, I’m number 596 on the interest list, does this mean I can board for payment now?
Last edited:
You can order now.I remember some talk about needing to wait, I’m number 596 on the interest list, does this mean I can board for payment know?
Question before I pull the trigger on an order. "Opening for QSound PCB (Luck of the "draw" on this)" can anyone explain the luck of the draw aspect here? Also, source for the Mitsurugi spinner?
Thanks,
Some of the CPS1 multi kits will have a genuine Qsound ASIC. Others will instead have an FPGA that behaves exactly the same. Some people here feel the boards with a genuine Qsound ASIC are more desirable.
Mitsurugi-w is a forum member here. He will be selling accessories for the CPS1 multi kit.
Thanks for the clarification, ordered. Now I just need to track down some ROM files...
After doing an inventory of my CPS1 boards I'm afraid I don't have a good spare... I have two that have issues, one that's currently on my Chinese X-in-1 setup and then one clean recapped 12mhz dash board that I had SF2 running on which I'll be repurposing for my own multi-kit. I now have way more B+C boards than A boards....
thank you for taking the time to respond, is going to take sometime till i find oneAfter doing an inventory of my CPS1 boards I'm afraid I don't have a good spare... I have two that have issues, one that's currently on my Chinese X-in-1 setup and then one clean recapped 12mhz dash board that I had SF2 running on which I'll be repurposing for my own multi-kit. I now have way more B+C boards than A boards....
ShootTheCore
Legendary
Instructional PDF and tutorial video are here:
https://www.arcade-projects.com/threads/cps1-multi-support-thread.21550/
ROM set is on archive dot org
https://www.arcade-projects.com/threads/cps1-multi-support-thread.21550/
ROM set is on archive dot org
thank you ShootTheCore exactly what i needed thank you also got the ROMs as well now all is left is to find an A and C board didn't know that it requires also a C board
Find @sheep_nova here or on eBay
thank you for the info I'll will contact him and ask if it has the boards thanks again
mike hancho
Student
Hi all! just finished my custom "Baby Blue" out of a blast city cab. I got my cps2 darksoft and it works great!! I finally was able to put together my cps1 darksoft and it seems to have 1 issue. Qsound audio is not working. when i hook up rca cables i just get feedback. the cps1 i have has the capcom qsound chip. am i forgetting a setting to make this work?
