Search results

Hello, I'm going through my stuff and thinning out my extra stuff. I'll keep the spreadsheet up to date as I can. I will reply with more stuff as I find them. Notable stuff so far are: Cps3 multi Cps3 bare board NOS BLast city CP and cpo NBA Jam TE Namco 246/256 Chihiro WMMT 3DX+ Art package...

I got a pair of cps3 non working CPS3 and was told I can use one for parts. I decided to repair the one with the simm 6 error. The boards have previously been worked on. I did each of these step then test the simm in the darksoft menu. - Replace 3 missing filter caps and redid the previous...

Hello, I'm looking for a t-unit sound board. I'm trying to pair one up to a nba jam board. The jam is not as fun without sound.

I am working on a naomi 2 that give me these graphical issues. Ram test say all ram is good. I have swap all the ram around the gpu. Any idea where else I should look?

I'm working on a HOTD4 that randomly freeze. At first I tracked it down to a bad psu. I replaced it with a new corsair 650W and it ran fine for awhile. So far the psu and ram has been replace. As a test I have removed the hdd and boot up the system sometime it would freeze at the now loading...

I am attempting to repair a cps digital install. I was not the original installer. When I have a hdmi cable plug in my TV does not get any video/audio. In my input select that hdmi port does not even activate. I have done the following: Removed and reinstall the cps digital (using original...

I need a Type 1 (837-13551-92) to do some testing and only had 2 broken type one. 1st type 1: Naomi did not recognize the io. Between this one the relay did not click like the other. Replace the 74VHC04 (ic8s pin 5 was stuck high) from the other io. Tested working 2nd type 1: Naomi did not...

I am am looking for said file so I can burn a key. Are the files out there somewhere?

I have a Naomi that is giving me a 01 error on my working test cart (work on my other N1) the pin look good and plugging it in on the bottom side also give me the same error so I don't think it's pin related. Has anyone seen this before?

I have a friend that need a new video card. Do they have special bios like the X2 and what is consider the best/most compatible with most games. We are trying to get battle gear 4 going again.

I have a net dimm that only boot some time. I have narrow it down to the main ram board. The network daughter board work on another netdimm. The bios and pic is also good. I also have another netdimm coming in from a friend in about month or 2 that give error code 22. It was working last year...

Going through some of stuff. I have an original Asia Progear B board with a crack case (600 USD). I removed the battery and install a pic to inject the code on boot. MVS viewpoint (300 USD). Had to replace the SI or MI ic. I will have to check on that later. Partial Irritating Maze (1000...

Edit: Anything past this point, you will be put in a queue. If I don't receive payment from a pending order I will go down the list. Ok form is up. I will DM you with PayPal address. Will ship out anywhere from 1-2 week once payment has cleared. A reminder again this is in Canadian dollar. If...

This is an interest post for some repro Monkey ball parts. This is a collaboration between Mirko and I. All prices are in USD and shipping is extra. We are hoping to ship late November. I will contact you for payment once they are ready to ship. I don’t want to do pre-order as we will loose on...

Hi, I have a KI that has a blown video ground most likely from pluging into a monitor with isolation. Can anyone take a clear picture of the video ground section by the jamma edge

For Sale 55.00 (3 5 available) - 128mb simm tested working by writing 3rd strike 50.00 (4 available) - 64mb simm tested working by writing 3rd strike If anyone in Canada that want to get their cart flash to the new Ultrabios (or any publicly available bios) I can do it for 50 CAD+Shipping Sold...

I'm helping a buddy setup his X2. He has a sega i/o a 838-13683-93 and -02. We can't seem to get the kicks working properly. He doesn't have a game for the naomi but in the jvs input test the register. On my end I only have a capcom io and that work. Is his sega io not compatible? He confirmed...

I have a MS2930 that work for the most part. With the dip on 15/24 kHz setting thing work find. Once it set to 31khz it goes to shut down. Any idea where to start?

Any expert out there out familiar with the Ms2930,31,33 family of chassis? I have 2 MS2930 that have this problem. I have neck glow but no high voltage. Where do I start troubleshooting?

My psone screen finally died in my portable jamma test rig. Are their any other screen I can use for this? I have a gbs8220 if vga is the only option. Don't want to use another phone screen if there are other/better options