I actually have a different problem with the Extractor. When hooking up the Extractor to a CAVE CV1000 PCB, there is no sound output coming through my cab (Egret II).
I decided to test the Extractor with a CPS2 game in the same cabinet, and I got sound output fine. I remember earlier in the thread @drfunk2k mentioned a change in the sound circuit.
Maybe its because the CV1000 PCB's are Mono only? Does anyone else with a CAVE PCB have the same issue?
Also, when using the BetsuBetsu that I received from @nassekova a while back, sound output is fine.
I did a quick test with a CAVE CV1000 PCB and you are correct, there is no sound when using the Extractor.
I could do that I guess. If there are EU people that are ok with that shoot me a message. But I must point out beforehand that my soldering is not the cleanest looking xDOK guys, since some are still having issues. I have come up with a plan, If people are willing to help.
I just asked @kingcar if he is willing to allow people to send him the JAMMA extractor so he can do the resistor swaps of R32 R34 and R36 to 150OHM
I will pay for the resistors and a labor fee.
But we have an issue many people are in the United States.
IF someone is good with desolder and solder then I will offer the same benefit of paying for the resistors and small labor fee.
This would complete several issues:
1. expensive shipping since we are keeping it in continent
2. a fix to resolve the issue of the JAMMA extractors.
So PLEASE @kingcar represent us in EU for this fix
and someone step up in the USA.
As i mentioned before I will SEND money via paypal to pay for resistors and fee UP FRONT .
OK guys, since some are still having issues. I have come up with a plan, If people are willing to help.
I just asked @kingcar if he is willing to allow people to send him the JAMMA extractor so he can do the resistor swaps of R32 R34 and R36 to 150OHM
I will pay for the resistors and a labor fee.
But we have an issue many people are in the United States.
IF someone is good with desolder and solder then I will offer the same benefit of paying for the resistors and small labor fee.
This would complete several issues:
1. expensive shipping since we are keeping it in continent
2. a fix to resolve the issue of the JAMMA extractors.
So PLEASE @kingcar represent us in EU for this fix
and someone step up in the USA.
As i mentioned before I will SEND money via paypal to pay for resistors and fee UP FRONT .
Yes, I tested it and the other PCBs are working fine.I’m a little bit confused. I thought CV1000 was just using jamma standard amplified mono, so wouldnt other pcbs also be affected?
edit: Testing on SDOJ is one hell of a nice flex btw Thats like a 6000$+ pcb
Sounds good - just keep me posted and I'll be happy to help. I've done full line fabrication before and can get these turned around very quickly.@kingcar will handle EU for the resistor swaps, he said he can handle paying for the resistors and doing it for free, so I will pay the shipping cost back to the customer.
@WhiteCrow that sounds great. ALL usa users can send to you and ill pay for the resistors and your fee. The customer should pay for return shipping since shipping within usa is not so expensive.
But please wait, let @Axun figure out whats going on with the CAVE sound.
So everyone with the JAMMA extractor be patient the final fix is coming soon at my expense.
View: https://www.youtube.com/watch?v=xwtM6z0mKJY
11min Review by Scarlet Sprites @Scarletspeedstr
THANKS!
is just me or it is some sort of interference on the video output?