Hi all! Working on a frankenvegas, I ordered an I/O board for it, the person said it was a Vegas I/O, and I can’t tell what it’s from, but it doesn’t have a standard U37 PIC. Can anyone identify this IO and determine if it’s compatible with gauntlet dark legacy?
- Thread starter VenomXL
- Start date
I don't have any intimate knowledge of Vegas hardware but these are my two Vegas setups if it helps. I can take closer pics if necessary.
The top one is an older Blitz/Showtime upgraded to Sport Station and the bottom one is Gauntlet Legends upgraded to Dark Legacy.
The top one is an older Blitz/Showtime upgraded to Sport Station and the bottom one is Gauntlet Legends upgraded to Dark Legacy.
Looking through System 16 yours looks like an Atari Denver i/o board.
https://www.system16.com/hardware.php?id=784
https://www.system16.com/hardware.php?id=784
You could get another VGA cable or just unthread the nuts from the VGA port on the board. The specific VGA cable you're looking for is from a Voodoo card.
https://www.ebay.com/itm/224782227973
For a fans, the stock enclosure has two fans that blow across the boards and one on a 180* bracket hovering over the video card. You could probably 3d print or piece something together from the hardware store. The stock fans are 5v but you have access to 5v and 12v. I'd probably get a PC Molex y cable to split one of the power connectors and then get a Molex to fans adapter and some PC fans.
These are just examples:
Fans:
https://www.amazon.com/quiet-Wings-high-Speed-BL081-Cooling/dp/B07M7TGY9Y/ref=sr_1_16
Fan adapters:
https://www.amazon.com/TeamProfitcom-Adapter-Splitter-Braided-Sleeved/dp/B08DFQS3HT/ref=sr_1_19
Splitter:
https://www.amazon.com/NEORTX-Female-Splitter-Adapter-Cooling/dp/B07YXPQ1PW/ref=sr_1_10
https://www.ebay.com/itm/224782227973
For a fans, the stock enclosure has two fans that blow across the boards and one on a 180* bracket hovering over the video card. You could probably 3d print or piece something together from the hardware store. The stock fans are 5v but you have access to 5v and 12v. I'd probably get a PC Molex y cable to split one of the power connectors and then get a Molex to fans adapter and some PC fans.
These are just examples:
Fans:
https://www.amazon.com/quiet-Wings-high-Speed-BL081-Cooling/dp/B07M7TGY9Y/ref=sr_1_16
Fan adapters:
https://www.amazon.com/TeamProfitcom-Adapter-Splitter-Braided-Sleeved/dp/B08DFQS3HT/ref=sr_1_19
Splitter:
https://www.amazon.com/NEORTX-Female-Splitter-Adapter-Cooling/dp/B07YXPQ1PW/ref=sr_1_10
