chomponooch
Enthusiast
My cps 2 multi setup has been working perfectly long time till last Saturday...
I've not changed anything (even removed it from plastic case) but sudennly it boots to solid colour screen.
Sometimes (very very rarely) it boots normally and after power off/on it boots to static green/blue/red screen.
On the LCD everything seems to be ok - flashing, key writting, have fun etc.
The only things I've done so far are:
- try to boot it on another motherboard - without effect.
- checked multi with another two sd carts (sandisk 2 and 4 gb) and effect is still the same - after flashing multi boots to colour screen with short sound buzz.
- sd with old rompack (after disconnecting key wires) - nothing has changed.
Of course I'm going to try run it on a different B board - but for now I havn't any other one - Is there anything I could do first (until I'll get another b-board)?
Thank you for any help.
I've not changed anything (even removed it from plastic case) but sudennly it boots to solid colour screen.
Sometimes (very very rarely) it boots normally and after power off/on it boots to static green/blue/red screen.
On the LCD everything seems to be ok - flashing, key writting, have fun etc.
The only things I've done so far are:
- try to boot it on another motherboard - without effect.
- checked multi with another two sd carts (sandisk 2 and 4 gb) and effect is still the same - after flashing multi boots to colour screen with short sound buzz.
- sd with old rompack (after disconnecting key wires) - nothing has changed.
Of course I'm going to try run it on a different B board - but for now I havn't any other one - Is there anything I could do first (until I'll get another b-board)?
Thank you for any help.