Did you make sure to place the 27c160 in the proper place on the multi?
Edit: looks like you did.
Edit: looks like you did.
It was an even more stupid problem ...Stupid question but you did program all of the eproms but NOT the gal?
In the pack with all.the rom there is the file for the gal so I burn it. And i didn't understand the right way when you ask me "Stupid question but you did program all of the eproms but NOT the gal?" I understood that you ask me if i forget to burn the gal. Sorry for the lost of timeThe gal never needs to be burned. It's a protected device that I program here. So I'm guessing that your gal just needs to be reprogrammed with proper code.
No sir . No support of M72 multi on MT1 (m81 hardware)Will this install on a Major Title 1, and is there any possibility of support for Major Title 1?
Air Duel Battle Chopper / Mr. HELI no Dai-Bouken Dragon Breed Gallop : Armed Police Unit Hammerin' Harry / Daiku no Gensan | Image Fight Legend of Hero Tonma Ninja Spirit / Saigo no Nindou X Multiply |
i looked for the original chip but i dont seem to have it anymore. sorry.Yeah, right there. But that's the one you get from @Mitsurugi-w and replaces the original. I'm looking for the chip that was sitting there before.
Bump! Please check your IREM M72 or the chips left, if you installed a multi already. We need to get those dumped. I have Gallop Japan, coming soon from @Jag-MasterThis is a special request. If you bought a multi and have one of the following i8751, please DM me. That's the long chip that you need to replace with the AT89S51 that you receive with your kit.
Please check if you have any of these:
NIN C-PR-B (Ninja Spirit, M72)
DB C-PR-B (Dragon Breed, M72)
Daiku no Gensan (Japan, M72 hardware)
GL C-PR-B? (Gallop - Armed Police Unit, M72)