jamma to pc/ps4 support GUNCON2 Lightgun

[FunFortress Retro Game]

 

[Blackfish]

Hey, I have bought a couple of these. I haven't had a chance to test one out yet. Anyone else tried one or know how to connect these correctly?

 

[FunFortress Retro Game]

Hey, I have bought a couple of these. I haven't had a chance to test one out yet. Anyone else tried one or know how to connect these correctly?

机柜连接pc用的

 

[Blackfish]

How do you connect the PS4 the card? Do you connect micro USB to PS4 USB input?

 

[FunFortress Retro Game]

How do you connect the PS4 the card? Do you connect micro USB to PS4 USB input?

typec usb cable connect ps4

 

[Blackfish]

I'm using a Namco Noir cabinet and have it connected to the JVS via USB and the PS4 via USB-C. Board powers up but is not recognised by the PS4 at all. Do you have a video of these boards working or some instructions on its use? I have received no documentation.

 

[Blackfish]

My board differs from the one shown in above images. I have the

Arcade JAMMA JVS to PC/PS4/PS5/Xbox360/NSwitch LCD Cabinet Pico MiSTer Fpga CRT Emudriver 2-in-1 Conversion Board Xinput Dinput​

 

[FunFortress Retro Game]

My board differs from the one shown in above images. I have the

Arcade JAMMA JVS to PC/PS4/PS5/Xbox360/NSwitch LCD Cabinet Pico MiSTer Fpga CRT Emudriver 2-in-1 Conversion Board Xinput Dinput​

你好，需要配置成PS4 work mode,请看图片。按住BTN4然后再上电，配置成PS4模式，玩家1和玩家2都需要这样配置。

 

[Blackfish]

Can I please have a picture that shows it connected to a ps4 working. I have tried multiple different setups and none work. Here is a photo after I setup with jamma connected and pushed button 4. Now LED has changed from green to yellow. Still not recognised by PS4

 

[Blackfish]

Really requires better instructions on how to use and setup.

 

[FunFortress Retro Game]

Can I please have a picture that shows it connected to a ps4 working. I have tried multiple different setups and none work. Here is a photo after I setup with jamma connecte

单击展开...你好，需要配置成PS4 work mode,请看图片。 按住BTN4然后再上电，配置成PS4模式，玩家1和玩家2都需要这样配置。
附件

Can I please have a picture that shows it connected to a ps4 working. I have tried multiple different setups and none work. Here is a photo after I setup with jamma connected and pushed button 4. Now LED has changed from green to yellow. Still not recognised by PS4

你好，需要按住jamma金手指的B4按键不放，然后再插入usb线到ps4，才可以切换为PS4 work mode

 

[FunFortress Retro Game]

单击展开...你好，需要配置成PS4 work mode,请看图片。 按住BTN4然后再上电，配置成PS4模式，玩家1和玩家2都需要这样配置。
附件

你好，需要按住jamma金手指的B4按键不放，然后再插入usb线到ps4，才可以切换为PS4 work mode

记得跳线模式切换到 JVS2PICO模式。才可以用JVS控制您的ps4